Post Processor Customization

Post Processor Customization & Development in Coimbatore

New machine, new controller, or a program that does not run right? We edit and build post processors so your CAM output runs correctly on your exact machine.

Send Us Your Post Processor Issue Common Questions

Why the Post Processor Matters

A post processor translates CAM toolpaths into the G-code dialect your controller understands. When it does not match the machine, the result can be wrong tool changes, incorrect canned cycles, bad rotary-axis output, or programs that need hand-editing before every run.

This usually shows up when a new machine arrives, a controller changes, or a shop starts using 4-axis or 5-axis work. We fix existing posts and build new ones, so the code coming out of the CAM system is ready for the machine.

Fix an existing post processor that gives errors or wrong output.
Customize a post for your machine, controller options and shop standards.
Rotary-axis (4-axis and 5-axis) post support.
Mastercam post processor editing and development.

Discuss Your Part

CAM toolpath to G-code workflow showing the post processor

Controllers

Controllers We Customize Post Processors For

Fanuc

Posts for Fanuc controllers and their common cycles.

Mitsubishi

Output matched to Mitsubishi controller conventions.

Siemens

Siemens-style code and cycle handling.

Mazak

Posts for Mazak machines and their program formats.

Haas

Haas-ready output for VMC and other Haas machines.

Another Controller?

Ask us. We can look at other controllers on request.

Learn more →

How It Works

From Problem to Working Post

1. Send Details

Your machine, controller, CAM software, the current post and what is going wrong.

2. Edit or Build

We correct the post or build a new one to match your machine.

3. Test & Deliver

We check the output logic and hand over the post with notes.

FAQ

Common Questions

What is a post processor?

A post processor is the file that converts CAM toolpaths into G-code for a specific machine and controller. Without a correct post, the same toolpath can produce code that does not run properly.

Can you customize a post processor for my controller?

Yes. We customize and develop post processors for Fanuc, Mitsubishi, Siemens, Mazak and Haas controllers. If you have another controller, contact us and we will look at it.

Do you edit Mastercam post processors?

Yes. We work with Mastercam, and we edit existing posts or build new ones to match your machine.

When do I need a custom post processor?

Typically when you buy a new machine, change a controller, add a rotary axis, or find you are editing G-code by hand after every post.

Do you offer post processor customization in Coimbatore?

Yes. ZEROVEX is based in Coimbatore and works with machine shops and manufacturers on post processor editing and development.